New kits by Volks on the horizon
Moderator: kosh
New kits by Volks on the horizon
Haven't seen it mentioned elsewhere :
-1/32 LED Mirage bust, a page is up on Volks' site : http://www.volks.co.jp/jp/fss/hsg_ledbs/products.html
-1/100 Bang Doll : plastic
Have a look here, down the page for some painted pictures of the LED bust and grey Bang doll : http://blog.livedoor.jp/azure_toy_box/a ... 41440.html
-1/32 LED Mirage bust, a page is up on Volks' site : http://www.volks.co.jp/jp/fss/hsg_ledbs/products.html
-1/100 Bang Doll : plastic
Have a look here, down the page for some painted pictures of the LED bust and grey Bang doll : http://blog.livedoor.jp/azure_toy_box/a ... 41440.html
Re: New kits by Volks on the horizon
its awesome
but so too is the price
did i see wrongly, or is the bang doll retailing for only 8000 yen?
that is bloody cheap

but so too is the price
did i see wrongly, or is the bang doll retailing for only 8000 yen?
that is bloody cheap
- Rubel Colus
- Posts: 838
- Joined: Sun Aug 29, 2004 10:49 am
- Location: The little red dot...
Re: New kits by Volks on the horizon
more pics of the 1/32 bust LED Mirage
http://www.moeyo.com/2009/02/post_7229.html
take note the price gets higher the later you pre-order...
トレフェスin 幕張プロローグ '09年2月22日 会場特別価格:98,000円
特別先行受注 '09年2月23日~3月24日 先行特別価格:102,900円
第一次受注 '09年3月25日~4月24日 第一次予約価格:113,400円
第ニ次受注 '09年4月25日~5月24日 通常価格:123,900円
※送料1,000円が別途必要です。
http://www.moeyo.com/2009/02/post_7229.html
take note the price gets higher the later you pre-order...
トレフェスin 幕張プロローグ '09年2月22日 会場特別価格:98,000円
特別先行受注 '09年2月23日~3月24日 先行特別価格:102,900円
第一次受注 '09年3月25日~4月24日 第一次予約価格:113,400円
第ニ次受注 '09年4月25日~5月24日 通常価格:123,900円
※送料1,000円が別途必要です。
Looking for:
- FSS Eng Vol 1(Black cover)

- FSS Eng Vol 1(Black cover)

- Nu Soard Graphite
- FSS Scholar
- Posts: 1197
- Joined: Thu Jan 22, 2004 1:59 am
- Location: Float Temple
- happy hopping
- Posts: 606
- Joined: Sat Apr 10, 2004 1:29 am
Re: New kits by Volks on the horizon
very impressive. It's about time. For the longest time, I thought these volks FSS sculptor jumped off a bridge
that 8000 yen bangdoll, is that IP? Because at that price, it can't be resin
that 8000 yen bangdoll, is that IP? Because at that price, it can't be resin
If you buy a pet from pet stores , you are encouraging those breeders to breed more. This is the condition that they lives in:
http://uk.youtube.com/watch?v=Iu_JqNdp2As
when you buy a pet:
http://uk.youtube.com/watch?v=WCNr-VrkXl8
Adopt a pet
http://uk.youtube.com/watch?v=Iu_JqNdp2As
when you buy a pet:
http://uk.youtube.com/watch?v=WCNr-VrkXl8
Adopt a pet
Re: New kits by Volks on the horizon
any update on the 8000yen bang doll by volks?
cheers,
wps
cheers,
wps
Re: New kits by Volks on the horizon
the new bang doll been posted on volks website now~
http://www.volks.co.jp/jp/fss/ims_bang/index.html
http://www.volks.co.jp/jp/fss/ims_bang/index.html
- happy hopping
- Posts: 606
- Joined: Sat Apr 10, 2004 1:29 am
Re: New kits by Volks on the horizon
Does any1 know what SMM does vs. MM? Is it still using those cheap connection joint?
If you buy a pet from pet stores , you are encouraging those breeders to breed more. This is the condition that they lives in:
http://uk.youtube.com/watch?v=Iu_JqNdp2As
when you buy a pet:
http://uk.youtube.com/watch?v=WCNr-VrkXl8
Adopt a pet
http://uk.youtube.com/watch?v=Iu_JqNdp2As
when you buy a pet:
http://uk.youtube.com/watch?v=WCNr-VrkXl8
Adopt a pet
Re: New kits by Volks on the horizon
The SMM description doesn't say much, it basically describes that zoukei-mura included movable joints while remaining as close as possible to how the bang doll looks in design. It doesn't say much about how good its articulation is, nor does the picture show how posable the bang doll is.
- happy hopping
- Posts: 606
- Joined: Sat Apr 10, 2004 1:29 am
Re: New kits by Volks on the horizon
does the 1/32 bust c/w semi-transparent resin covering for all its external parts (any parts that is Not internal skeleton structure)? Because some seller at ebay does. And I can't find any zoom in photo from Volks that shows any sort of semi-transparent covering
Re: New kits by Volks on the horizon
The armor parts are cast in clear. If you paint them right you can make them translucent like in the buildup photos. I just finished cleaning up the parts for the kit I from e2046. It's a super sweet model. I wish I could have afforded an original kit because it's totally worth the full price.
Re: New kits by Volks on the horizon
hi everyone
the 1/32 Led from e2046 is clearly the poorest quality kit I have ever seen in 10 years of recast.. of course I was amazed by the size and everything when opening the box, but believe me, nothing fits together, many broken parts, holes, cracks in clear resin as well as bubbles, i.e. totally unworkable... I have many pictures if anyone interested.. e2046 only cares about giving the cheapest prices and their quality is proportional with it. it is a complete waste of money.. you should spare some more and get the SMS workshop version (available at hobbylink for the same price as in China), you can even get a precleaned super clear version (it's really crystal clear!!) for a hundred box more. totally worthy especially when you think of the hours and professional electric tools you'd need to get close to their special finish. write me an email if you need more infos as I don't check this forum very often. I also have many pictures of the SMS kit for those interested.
the 1/32 Led from e2046 is clearly the poorest quality kit I have ever seen in 10 years of recast.. of course I was amazed by the size and everything when opening the box, but believe me, nothing fits together, many broken parts, holes, cracks in clear resin as well as bubbles, i.e. totally unworkable... I have many pictures if anyone interested.. e2046 only cares about giving the cheapest prices and their quality is proportional with it. it is a complete waste of money.. you should spare some more and get the SMS workshop version (available at hobbylink for the same price as in China), you can even get a precleaned super clear version (it's really crystal clear!!) for a hundred box more. totally worthy especially when you think of the hours and professional electric tools you'd need to get close to their special finish. write me an email if you need more infos as I don't check this forum very often. I also have many pictures of the SMS kit for those interested.